Work steady

discussion of anything related to tools

Moderators: jrccaim, Bob_Fleet, gavin, Robin Fawcett, HughSpencer

Work steady

Postby HughSpencer » Sun Sep 10, 2017 10:06 pm

As I've been asked by Ilerner about a work steady I made from a photo in a 1950's turning book I've decided it would be a good idea to share it more widely.
A steady is used on long thin spindles to prevent them bending away from the chisel and causing chatter-marks on the work.
There are many more sophisticated ways of doing this but this is simple and it is self adjusting allowing you to cut directly in front of the steady.
As the wood is turned away, gravity pulls a wedge down that pushes the steady against the work so you don't have to keep adjusting it.
steady1.jpg
headstock view of steady
steady1.jpg (505.04 KiB) Viewed 468 times

steady2.jpg
tool rest removed
steady2.jpg (535.72 KiB) Viewed 468 times

steady3.jpg
Steady and holder out of bed.
steady3.jpg (571.18 KiB) Viewed 468 times
User avatar
HughSpencer
Site Admin
 
Posts: 429
Joined: Mon Jan 24, 2005 12:05 am
Location: Peterborough

Re: Work steady

Postby ilerner2 » Mon Sep 11, 2017 2:08 am

Hugh this is excellent. Thank you for posting the photos. I'm sure others will find it equally valuable. Cheers.
ilerner2
Regular
 
Posts: 37
Joined: Tue Apr 04, 2017 12:59 am
Location: Jalisco, Mexico


Return to Tools

Who is online

Users browsing this forum: No registered users and 3 guests