Carving Hawthorn burrs?

Share experience of timbers and other greenwood materials - learn by other people's mistakes and triumphs.

Moderators: jrccaim, Bob_Fleet, gavin, Robin Fawcett, HughSpencer

Carving Hawthorn burrs?

Postby ToneWood » Fri Nov 02, 2012 2:35 pm

I was given some heavily burred Hawthorne last week. I think it had been put aside in case a wood turner could use it. However it is rather small diameter. I'm not a wood-turner (I reckon it would be too small for a lathe), so I'm wondering if it would be practical for me to work this with adze, knife, axe & gouge? I always imagine burrs to be very tough & hard - at least these are not as dry and hard as the last one I was given.

I'm thinking that I might be able to make some very small, long bowls (or kuksa) from it and/or perhaps spoons/ladles. If not, it's firewood .
ToneWood
Regular
 
Posts: 1846
Joined: Mon Jan 30, 2012 2:21 pm

Re: Carving Hawthorn burrs?

Postby gavin » Fri Nov 02, 2012 7:19 pm

Try it and find out! Compare with A N Other wood and report back.
Gavin Phillips


- teacher, demonstrator & supporter of greenwoodworking & human-powered turning
- Supplier of Fun & Confidence

info@shed-therapy.com
http://www.shed-therapy.com
User avatar
gavin
Regular
 
Posts: 1595
Joined: Mon May 16, 2005 4:17 pm
Location: Dalbeattie, near Dumfries, Scotland

Re: Carving Hawthorn burrs?

Postby bulldawg_65 » Sun Nov 04, 2012 4:39 pm

Tone, if you aren't adverse to using acrylic or ca glue to fill the holes left by the spaces and such left in burled wood that wood would probably make some spectacular bowls and such. :D
Phil Steele
bulldawg_65
Regular
 
Posts: 443
Joined: Mon Dec 05, 2011 3:10 am
Location: Noblesville, IN USA

Re: Carving Hawthorn burrs?

Postby SeanHellman » Tue Nov 06, 2012 7:23 pm

Send it all down to me :D I can certainly make stuff from it and as an added bonus I will show you what can be made from it. Work it green or it will get a bit hard :cry:
"Scarcely anything is original- it`s very hard to be totally inventive, so I am not terribly interested in originality. Vitality is all I care about" Clive James
Green wood courses, tools, demonstrations.
http://www.seanhellman.com/woodwork/
User avatar
SeanHellman
Regular
 
Posts: 929
Joined: Tue Sep 30, 2008 9:13 pm
Location: South Devon


Return to Materials knowledge

Who is online

Users browsing this forum: No registered users and 1 guest

cron