long pole lathe

When you are starting out there are a lot of questions. Ask them here!

Moderators: jrccaim, Bob_Fleet, gavin, Robin Fawcett, HughSpencer

long pole lathe

Postby roobarb » Tue Sep 02, 2014 8:35 pm

Hello, I am fairly new to pole lathing so wanted some advice- what are the advantages/disadvantages of having a really long pole lathe bed- 1.7m- does anyone have experience of working on a lathe this size and making things like walking sticks/long chair backs? does it work OK? thanks
roobarb
new member
 
Posts: 1
Joined: Mon Sep 01, 2014 8:16 pm

Re: long pole lathe

Postby Robin Fawcett » Thu Sep 04, 2014 10:20 am

The problem you're going to encounter on long, thin spindles is whip - the wood bends, tries to climb up the edge of your tool then drops down causing chatter marks. This can be overcome with practise or the use of a steady of some kind. Could be good for turning the back legs of ladderback chairs, not sure about walking sticks - anyone here ever turned them on the pole lathe? I've seen lathes with long beds with 2 sets of poppets so that 2 people can turn at once.
http://www.facebook.com/GreenWoodwork?ref=tn_tnmn[url=http://www.treewright.co.uk/]
Green woodwork courses, treen, demonstrations & talks http://www.treewright.co.uk[/url]
User avatar
Robin Fawcett
Site Admin
 
Posts: 970
Joined: Tue Mar 01, 2005 8:47 pm
Location: Essex/Herts/London


Return to Beginner's corner

Who is online

Users browsing this forum: No registered users and 3 guests

cron